wika溫度傳感器設定和測量

●送風或排風溫度傳感器

. 限定傳感器,例如*低送風溫度的設定

●參考傳感器,例如房間溫度的補償隨室外溫度變化而按一定函數關系轉換

. 露點溫度傳感器

●測量傳感器,例如用于測量值的顯示或者配套樓宇自控系統使用

設定元件的位置在面板里面。它包括6個插腳和一個短插頭。它是用來選擇所需的測量范圍和激活測試功能。

不同的插頭位置由以下不同的用處:

●用于溫度測量范圍:左邊位置短插頭(R1)= 0.. .50 °C中間位置短插頭(R2)= -50.. .+50 °C (出廠設置)右邊位置短插頭(R3)=

-5...+35 °C

. 用于激活測試功能: :短插頭在水平位置:信號輸出會顯示測試功能激活的值。

材質NTC 10K ,無源輸出,溫度可調范圍: -50... .80度,法蘭安裝,傳感器長度6000mm ;

1.風道溫度傳感器應用領域

用于采集風管內的空氣溫度

送風或排風溫度傳感器

限定傳感器,例如總線低送風溫度的設定

參考傳感器,例如房間設定溫度隨室外溫度變化而按-定的函數關系轉換

測量傳感器,測量值的顯示或配套樓宇自控系統使用

2風道溫度傳感器產品特點

測量平均值來保證測量信號的可靠性,也保證了測量值不受測量點的選擇和氣流條件的影響

Wika temperature sensor setting and measurement

● Air supply or exhaust temperature sensors

Limiting sensors, such as setting low air supply temperature

● Reference sensors, such as room temperature compensation, are converted into a certain functional relationship with changes in outdoor temperature

Dew point temperature sensor

● Measurement sensors, such as those used for displaying measurement values or supporting building automation systems

Set the position of the component inside the panel. It includes 6 pins and a short plug. It is used to select the required measurement range and activate testing functions.

Different plug positions have different uses as follows:

Used for temperature measurement range: Short plug (R1) on the left position=0.. 50 ° C Short plug (R2) in the middle position=-50+ 50 ° C (factory setting) Short plug on the right side (R3)=

-5...+35 ° C

. Used to activate the testing function:: Short plug in horizontal position: The signal output will display the activated value of the testing function.

Material NTC 10K, passive output, temperature adjustable range: -50... 80 degrees, flange installation, sensor length 6000mm;

1. Application fields of air duct temperature sensors

Used to collect the air temperature inside the air duct

Supply or exhaust air temperature sensor

Limit sensors, such as setting the low supply air temperature on the bus

Reference sensors, such as room set temperature converted into a fixed function relationship with outdoor temperature changes

Measurement sensors, display of measured values or use in supporting building automation systems

Features of 2-channel temperature sensor products

Measuring the average value ensures the reliability of the measurement signal and also ensures that the measurement value is not affected by the selection of measurement points and airflow conditions