SMC電磁閥氣動技術的優點:

1、氣動裝置結構簡單、輕便、安裝維護簡單。壓力等級低、故使用安全。

2、工作介質是取之不盡的空氣、空氣本身不花錢。排氣處理簡單, 不污染環境,成本低。

3、輸出力以及工作速度的調節非常容易。氣缸的動作速度一般為50~500mm/s ,比液壓和電氣方式的動作速度快。

4、可靠性高,使用壽命長。電器元件的有效動作次數約為百萬次,而SMC的一般電磁閥的壽命大于3000萬次,小型閥過2億次。

5、利用空氣的壓縮性,可貯存能量,實現集中供氣。可短時間釋放能量,以獲得間歇運動中的高速響應。可實現緩沖。對沖擊負載和過

負載有較強的適應能力。在一定條件下,可使氣動裝置有自保持能力。

6、氣動控制具有防火、防爆、防潮的能力。與液壓方式相比,氣動方式可在高溫場合使用。

7、由于空氣流動損失小,壓縮空氣可集中供應,遠距離輸送。

組成的氣動回路是為了驅動用于各種不同目的的機械裝置,其重要的三個控制內容是:力的大小、力的方向和運動速度。與生產裝置相

連接的各種類型的誑,靠壓力控制閥、方向控制閥和流量控制閥分別實現對三個內容的控制 

云聯電氣 技術支持

SMC solenoid valve VFS1120-5DZ-01/VFS1220-4DB-01 pneumatic valve pilot valve

Advantages of pneumatic technology:

1. The pneumatic device has a simple and lightweight structure, and is easy to install and maintain. Low pressure level, therefore safe to use.

2. The working medium is inexhaustible air, and the air itself does not cost money. The exhaust treatment is simple, does not pollute the environment, and has low cost.

3. The adjustment of output force and working speed is very easy. The action speed of the cylinder is generally 50-500mm/s, which is faster than the action speed of hydraulic and electrical methods.

4. High reliability and long service life. The effective action frequency of electrical components is about one million times, while the service life of general solenoid valves in SMC is more than 30 million times, and that of small valves is over 200 million times.

5. Utilize the compressibility of air to store energy and realize centralized gas supply. It can release energy in a short period of time to achieve high-speed response during intermittent movements. Can achieve buffering. Impact load and overload

The load has strong adaptability. Under certain conditions, pneumatic devices can have the ability to maintain themselves.

6. Pneumatic control has the ability to prevent fire, explosion, and moisture. Compared to hydraulic methods, pneumatic methods can be used in high-temperature situations.

7. Due to low air flow loss, compressed air can be supplied centrally and transported over long distances.

The pneumatic circuit is composed to drive mechanical devices for various purposes, and its three important control contents are: the magnitude of force, the direction of force, and the speed of motion. Related to production equipment

Various types of connected valves are controlled by pressure control valves, directional control valves, and flow control valves, respectively